Menu

中文版 | English

Eletta (Beijing) Instruments Co., Ltd.

HomeProduct
Electromagnetic Flowmeter / 
Electromagnetic Flowmeter

Electromagnetic Flowmeter

Electromagnetic flowmeter adopts Faraday law of electromagnetic induction, which can be used to measure the volume flow of conductive liquid and
slurry in a closed pipe. Such as tap water, sewage, mud, paper pulp, acid,
alkali, salt solution, food slurry, etc. It is applicable to petroleum, chemical
industry, electric power, mining, water supply and drainage, light industry,
food and other departments.

Product Introduction:


  • Advanced intelligent converters, two-line LCD display window with backlight, displaying instantaneous flow, accumulated flow

    rate, flow rate, flow rate percentage and other parameters at the same time, simple four-key operation menu, with relay alarm,

    data storage, self-inspection and self-diagnosis function, It can measure two-way flow, and has wide turndown

  • There are no moving parts in the transmitter, no pressure loss, sensitive reaction; It can measure the instantaneous pulse flow

    rate, not affected by the temperature, viscosity and density of the measured medium, good linearity.

  • It can be used in the corresponding explosion-proof places.

  • Available in compact and separate mounting type.


Specificaitons:

  • Max. Temp. : Compact type 80 ℃; Separate type:  rubber or polyurethane lining 80 ℃; PTFE lining 100 ℃

  • Material:  hard rubber, chloroprene rubber, polyurethane, PTFE(optional)

  • Electrode materials: stainless steel 316, stainless steel 316L, Hastelloy alloy B, Hastelloy alloy C, titanium, tantalum,

    platinum-iridium alloy, zirconium alloy (optional)

  • Pressure Level of Flange: PN40(DN15-50); PN16 (DN65 - 200); PN10 (DN250 - 1000); PN6 (48 " - DN2000)

  • Material: carbon steel (standard); Stainless steel, stainless steel 304, stainless steel 316, stainless steel 316L (optional)

  • Enclosure: IP65 or IP68 (rubber or polyurethane liner sensor with separate flow meter only)

  • Electrical output: 4-20mA,  frequency output 5000Hz, pulse output, alarm output, optional RS232C or RS485 serial

    communication interface

  • Power supply: 220V AC/50Hz or 24VDC RS485 serial communication interface